What board do we use?

SUPPLIERS
Logging takes place in the northern regions
In the regions of Ukraine (Polyssia) and the Carpathians, we work through the official system of electronic auctions for the sale of timber in Ukraine

STANDARDS AND DSTU
Further, the logs are sent to production and are cut into boards at the sawmill, the most often used sections are 50×200 mm, 50150mm, 50100mm. For construction, a board of 1-2 grade is used in accordance with GOST 8486-86 Lumber of coniferous species. Specifications

ROOM DRYING
The edged board is stacked in stacks that are loaded into the drying chamber, after the necessary time the board dries and its moisture content is 12-14%, it is in this form that the board enters the next stages of production.

FOUR-SIDED PLANING
The boards are planed on the Italian equipment LeadermacCompact 623, this allows to achieve high geometric accuracy of all frame parts, after processing, blanks with a cross section of 45×195 mm, 45×145 mm and 45×95 mm are obtained.

CNC SAW
The frame parts are made using a semi-automatic CNC-saw Spida 2000, which itself sets the dimensions along the length, and also allows you to perform high-quality cutting of corners within the range of 0-135 degrees. This allows you to make the frame of the house with high accuracy of fitting parts.

LABELING and PACKAGING
Each part is marked, and packaging is carried out in separate bundles according to the specification, while on each bundle.
Viber
Telegram
WhatsApp
E-mail